Gas stove repair method gas stove maintenance tips

The gas stove is an electrical product that every household has. When the gas stove is used for a certain period of time, various problems will occur, such as the gas stove can not afford fire. In order to help people have a deeper understanding of the gas stove, the next time Xiaobian will share with you how to maintain the gas stove during the usual use.

Gas stove repair method

On weekdays, what are the methods for the maintenance of gas stoves? Gas stoves leak or smell gas. Maintenance method: the rubber tube should be replaced or re-connected; re-ignition after the gas is blown away; if the flame of the gas stove is blown out by the wind or is extinguished during use, the switch should be closed, and then the gas is blown off and then ignited; Replace the igniter gas pipe; find that the gas cylinder valve, pressure reducing valve or gas furnace leak should be sent to the professional maintenance department for repair or replacement of new products.

See if the circuit is in poor contact. When our gas stoves can't be fired, many people will ignore this problem, but they are often seen in many old users. Look at the circuit is not good contact is mainly to see if the battery box positive or negative rust, the line is disconnected, if there is, the rust should be removed, the line is accurately connected. This is also a good choice for people.

In addition, when there is a problem with the gas stove, it can also be repaired in this way. See if the high voltage line is aging. The gas stove has a high-voltage line and its joints. Once there is aging, there is no way to catch fire. Add a set of high-voltage lines to prevent aging. This problem only needs to pay more attention in peacetime.

Gas stove maintenance tips

The maintenance of gas stoves is also receiving much attention. Due to the current state regulations, all gas cookers must be equipped with accidental extinguishing protection. This phenomenon is related to the flameout protection device. The working principle of the flameout protection device: When the fire is on, the thermocouple is heated by the fire, so that the heat generates electricity, and then the electromagnetic coil in the valve body generates suction to open the valve, so that the gas can be burned out; when the fire is extinguished or the thermoelectric Even if it is not burned, there will be no electricity, the valve will be automatically closed, and the gas will not be discharged, thus playing a safe role.

What are its maintenance techniques? Clean the stove tiles. Use a discarded candle head, the surface of the candle is smooth, even if there is oil stain on it, as long as the ordinary detergent is lightly rubbed with water, gently apply the seam of each tile, first along the seam Apply in the direction, apply it again after painting, and make sure the thickness of the candle is the same as the thickness of the tile.

Gas stove fire rack and vent cleaning. First fill a pot of water, put the fire rack on the stove to all cook, after the water is hot, the sticky dirt will decompose and peel off. To prevent the vent hole from being blocked, remove the stove head every week and use a toothpick to clean the vent hole once. Carbide and coke deposited on the stove head can be removed with a small brush, or a fine wire can be used to pierce the fire hole. This is also one of the maintenance techniques.

Through the explanation of today's article, I believe that we can help you further understand the gas stove. When there is a problem with the gas stove, you can also perform a self-repair process on the gas stove according to the above description of the maintenance techniques. In order to extend the service life of the gas stove, the relevant use skills should also be used in the daily use process.