Hyaluronic acid liquid filling machine | Acne essence liquid filling machine

Hyaluronic acid Liquid Filling Machine | Acne essence liquid filling machine

Product Name :Automatic Linear Liquid Filling Machine

Product Model :RG6T-6G

Product introduction: The automatic linear liquid filling machine is a fully automatic piston filling machine http://machine. The machine--dt34wl uses the up and down movement of the cylinder to simultaneously drive the piston in the corresponding material cylinder to reciprocate. So that the material cylinder before the negative pressure, and the signal valve to control the stroke of the cylinder, you can adjust the filling volume, so as to achieve accurate filling effect. The Fully Automatic Filling Machine is based on the reference of similar foreign products and has been redesigned and added some additional functions. Make the product more simple and convenient in terms of operation, cleanliness, installation adjustment, equipment cleaning, maintenance and other aspects.

Scope of application: The linear filling machine is easy to operate and easy to use. It is widely used in automated filling of liquids with different viscosities, such as food, medicine, chemical industry, daily chemicals, drinks, edible oil and other industries. Automatic Filling Machine is mainly used in lotion, care solution, oral liquid, skin care solution, disinfectant, liquid foundation, antifreeze, shampoo, hair care solution, hand soap, eye lotion, nutrient solution, injection, pesticide , medicine, cleansing, shower gel, perfume, edible Oil Filling Machine , milk, juice, beverage, lubricating oil, and liquid filling in special industries.
Cosmetics liquid filling machine application

Features:
A. The liquid filling machine is based on the reference of similar foreign products for improved design and added some additional functions.
B. It is more simple and convenient to use the product in the operation, accuracy error, installation adjustment, equipment cleaning, maintenance and other aspects.
C. The machine is compact and reasonable in design, simple and beautiful in appearance, and easy to adjust filling volume.
D. The machine has six filling heads, driven by six cylinders, and the filling materials are more rapid and accurate.
E. The pneumatic components of Germany FESTO, Taiwan AirTac and Taiwan Delta's electronic control components have stable performance.
F, material contact parts are made of 316L stainless steel.
G. The filling machine adopts Korean photo-eye device, Taiwan PLC, touch screen, frequency converter and French electrical components.
H, convenient adjustment, no bottle filling, accurate filling quantity and counting function.
I. The use of anti-drip and drawing filling head, anti-high foam product filling and lifting system, positioning system to ensure the positioning of the bottle and liquid level control system.

Semi-Automatic Liquid Filling Machine http://
Automatic filling machine http://
Automatic bottled water filling machine http://
Apple vinegar filling machine http://

Technical Parameters:

Filling head

6 head type

Electric current

3A

power supply

220/110V 50/60Hz

power

500W

Pressure

0.4-0.6MPa

Filling accuracy

≦±1%

Filling speed

60-100 bottles/min

Optional models

5-60ml 10-125ml 25-250ml 50-500ml 100-1000ml 250-2500ml 500-5000ml

The specific operation of the equipment:
1. Place the filled bottle upside down on the work basket and check that the bottom of the bottle is aligned.
2. Place the vacuum basket in a vacuum fill and cover the quick-open lid and lock it tightly.
3. Close the vent valve, inlet valve, and turn on the vacuum pump. Adjust the true air conditioning valve to allow the vacuum level (depending on the filling volume) to meet the process requirements. Depress the foot pedal to allow the liquid bottle to be filled under the liquid.
4. Slowly open the inlet valve. At this time, the filling level rises. At the same time, open the valve to keep the liquid level between the liquid levels specified by the sight glass.
5. When the vacuum gauge pointer is in the 0 state, it is proved that the filling liquid is finished, and the foot clamshell is returned. The quick opening jar lid can be opened to remove the filled liquid bottle.
6. For the troubleshooting of vacuum mercury, please refer to the XD series rotary vane vacuum pump manual. The vacuum pump is not used for more than seven days. The oil used in the mercury should be drained and flushed with new oil and replaced with new one. Anti-oil moisture corrosion pump body.

The linear liquid filling machine is mainly used for accurate filling of bottled liquid products to meet the requirements of various liquid liquid products:

Liquid filling machine http://
Essence liquid filling machine http://

Maintenance and care:
1. Always keep the equipment clean, especially for the electric appliances on the electric panel, to prevent moisture and dust, and it is forbidden to change the program of the inverter and program controller at will.
2. The power supply voltage should be stable, not exceeding ±15%, the material temperature should be maintained at 10°C ~ 40°C, the ambient temperature should be maintained at 5°C ~ 40°C, and the temperature should be maintained at 5 ~ 95% PH.
3. The flowmeter used by this machine is a precision instrument. Therefore, the oil must be filtered before it can be filled.
4. Turn off the power supply and oil inlet valve after completing the work.
5. Pay attention to the cleanness of the infrared sensor. Clean it regularly with clean cotton. It is forbidden that any object is close to the sensor during the work process. Do not have strong light directly or reflect to the sensor, otherwise it will prosper.
6. Add cylinder lubricants to pneumatic triplets on a regular basis.
7. When the machine is not used for a long period of time, wipe all parts clean and cover the dust with plastic or tarpaulin.