In the field of printing and packaging, surface finishing is one of the components of the entire process design. For printed matter or packaging boxes, surface finishes are important both in terms of giving the product a professional and high-quality image, and in maximizing the durability and attractiveness of the product. The combination of plastic film and cardboard can combine images with attractiveness, protection and strength. The film not only enables the print to have a high-gloss or matt surface, but also ensures that the print reaches the application site safely.
Akzo Nobel Industrial Finishes offers a full range of adhesives for film coating to meet a variety of application needs. One of the goals of the company's paper coating R&D department is to produce adhesives for films with higher bond strengths. This goal promoted the development of Nubond Instant, a high-performance, “transient†adhesive that was specifically developed for dry compounding. It is suitable for coating a small thickness, high gloss or matt, pretreated OPP film on the surface of a printed or unprinted paper-based material.
Nubond Instant Adhesives show an ultra-fast development (almost "instantaneous") in adhesive strength, enabling subsequent processing (such as embossing, crimping, indentation and folding) to be performed immediately. The use of this adhesive shortens the "drying time" that is too long, which greatly increases the processing speed of the product. According to CHIP regulations, the non-volatile components of Nubond Instant Adhesives are considered harmless and do not contain any isocyanates.
Nubond Instant is a one-component solvent-based adhesive that does not require the addition of a curing agent. The company can supply Nubond Instant adhesives using various mixed solvents as needed. Adhesives also have the following characteristics:
â— Relatively stable with sensitive Reflex Blue pigments â— Resistant to tropical conditions after processing â— No lifespan â— Dryable by heated rollers or hot tunnels â— Reverse roller/blade coating technology
Source: "Global Box Industry"
Table of intent, refers exclusively for the table to eat with. Material can be divided into wood tables, wood tables, marble dining table, marble dining table, marble coffee table, dining table jade, jade dining table, jade coffee table, marble dining table.
Round table
Roundtable if the living room, dining room furniture is square or rectangular, round table diameter increments from 150mm. In most small and medium housing, as with a diameter of 1200mm table, too often too large, it can be customized a diameter of 1140mm the round table, the same can sit 8-9 people, but it looks more spacious space. If the diameter of 900mm above table, although people can sit, but too much should not be placed fixed chair. As the diameter of 1200mm table, put 8 chairs, very crowded. 4-6 can put chairs. In people for a long time, and then folding chairs, folding chairs in storage compartment collection.
Rectangular table
760mmx760mm square table square table and rectangular tables 1070mmx760mm is a common table size. If the chair can be inserted into Zhuodi, even a small corner, you can put a six-seater dining table, dinner, only the need to pull out some of the table on it. 760mm width is standard size table, at least not less than 700mm, otherwise, due to the table when sitting too narrow feet touch each other. Table legs preferably shrink in the middle, if four legs arranged in the four corners, very inconvenient. Table height is generally 710mm, with 415mm seat height. Be lower desktop, when dining, food on the table can be seen more clearly.Marble Dining Tables, Plywood Dining Table, Modern Dining Table and Chairs, Tables and Chairs for Restaurants
Taizhou Pinsum Furniture Co.,Ltd , http://www.pinsumchina.com