Editor's note: Moisture Analyzer is also called Moisture Analyzer, Moisture Analyzer, Quick Moisture Analyzer, Moisture Meter, Moisture Meter, Moisture Meter, Moisture Analyzer, Moisture Content Tester, Water Meter, Water Tester, Water Meter Wet meter. [Its care and maintenance are very important for the experiment.
1. Installation and location of instrument moisture analyzer:
1. The instrument should not be installed in a room with corrosive gas, which will corrode the circuit of the instrument and shorten the life of the instrument.
2. Where the room temperature is below 5 degrees or above 40 degrees.
3. Do not install it in a place with high sunlight and high humidity.
4. Do not install in places with unstable power supply. It is recommended to use electronic voltage regulator.
Second, electrode maintenance:
1. When the measuring electrode is contaminated, you can wipe it with acetone or absolute ethanol. If you still can't decontaminate, you can burn the platinum ball end with an alcohol lamp.
2. When the electrolytic electrode is contaminated, acetone or absolute ethanol can be injected into the cathode chamber and shaken repeatedly to remove internal dirt.
3. Drying of the electrolytic cell of the instrument moisture analyzer:
The electrolytic cell was decomposed and placed in an oven at about 50 degrees for five hours, and then the reagent was added after it was cooled naturally.
Puzzle 1000,1000Pcs Puzzle,1000 Piece Jigsaw Puzzle,1000 Pcs Puzzle Production
Dongguan Senfutong Paper Co., Ltd , https://www.boardgamefty.com