Faced with a pile of bright white toilets, looks almost the same, the price is much worse, how to choose to ensure that the purchase of the toilet is inexpensive, 10 map tells you the answer.
Part1: How to divide the toilet into three ways
There are a variety of toilets on the market. What should consumers look for when selecting? What kind of toilet is the most suitable for your own home, the following brief introduction for you to divide the toilet.
1, the type of toilet: Siamese and split
The choice of a one-piece or split type toilet is mainly based on the size of the bathroom space. Split-type toilet is more traditional, the production is the later use of screws and seals to connect the base and the second floor of the tank, the space is large, easy to hide dirt at the joints; Siamese-style toilet is more modern high-end, beautiful appearance, choice of rich ,One piece. But the price is relatively expensive.
2, sewage ways: rear, lower row
The rear row type is also called wall row type or horizontal row type. According to the literal meaning, the direction of the sewage can be known. When the rear row toilet is selected, the height of the center of the sewage outlet from the ground should be taken into consideration. This is generally 180 mm. The lower row is also called a floor row or vertical row. As the name implies, it refers to the toilet bowl with the sewage outlet on the ground.
The lower row of toilets should pay attention to the distance between the center point of the sewage outlet and the wall. The distance from the sewage outlet to the wall can be divided into three types: 400mm, 305mm, and 200mm. Among them, the northern market has a large demand for 400mm pits. The southern market has a large demand for 305mm pit products.
3, the water way: flush type, siphon type
Toilets purchase depends on the direction of the sewage. If it is a rear row type, it is necessary to purchase a flush toilet which directly discharges the dirt by the force of water. The flushing type sewage outlet is relatively large and deep, and the waste is discharged directly by the impulse of flushing water. The disadvantage is that the flushing sound is loud. If it is the next row, you should buy a siphonic toilet. There are two types of siphon subdivisions, including jet siphons and vortex siphons. The principle of the siphonic toilet is to form a siphon effect in the sewage discharge pipe by flushing water and discharge the dirt. The sewage outlet is small, and the noise is quiet and quiet when used. The disadvantage is that the amount of water used is large, and generally 6 liters of storage are used up once.
Part2: It is necessary to look carefully at the toilet seat
When choosing a toilet, the first thing to look for is the appearance. What kind of toilet is the best? The following is a brief introduction to the details of the appearance of the toilet.
1, glazed smooth and shiny
Toilets with good quality should have smooth glaze, no blistering, and saturated color. After inspecting the glazed surface, you should also touch the toilet's sewer. If it is rough, it can easily become clogged.
2, tap the surface to hear the sound
Toilets that are fired at high temperatures have a low water absorption rate, making it difficult to absorb sewage and produce odors. Middle and low-grade toilets have a high water absorption rate, are prone to odor, and are difficult to clean. After a long time, cracks and water leakage may occur.
Test method: Tap the toilet bowl by hand. If the sound is husky, it is not crisp and loud, it may have internal cracks, or the product is not cooked.
3, the weight of the toilet bowl
Ordinary toilet weight is about 50 pounds, good toilet is about 100 pounds. Because of the high temperature during firing, the high-grade toilets have reached the level of all-ceramics, so there will be a heavy feeling in the hands.
Test Method: Hold the tank lid with both hands to weigh it.
Part3: The quality of the components selected for toilets is the most important
In addition to appearance, when selecting a toilet, it is also necessary to look at the structure, outlets, calibers, water tanks, etc. These parts can not be ignored, otherwise it will affect the use of the toilet.
1, a best outlet
Now many brands of sewage holes are 2-3 (according to different calibers), but the more sewage holes affect the impact. The outlet of the bathroom is divided into the lower drainage and the horizontal drainage. The distance from the center of the outlet to the wall behind the tank should be measured. Buy the toilet of the same type to “place in the distanceâ€. The outlet of the horizontal drainage toilet should be equal to the height of the horizontal outlet, preferably slightly higher.
2, internal caliber testing
Sewer pipes with large caliber and glazing on the inner surface are not easy to catch dirt, and the discharge of pollutants is rapid and effective, which can effectively prevent clogging.
Test Method: Place the entire hand into the toilet seat, and generally have a hand capacity that is optimal.
3, listen to water sound
The water quality of branded toilets and ordinary toilets is very different, because almost every family has experienced the difficulty of water tanks. Therefore, when choosing a toilet, don't ignore the water part.
Test method: Press the water piece to the end, it is best to hear the button to send a crisp sound.
Part4: Pay attention to the actual test
The most important thing in the inspection of the toilet is the actual test. The water tank, the effect of flushing, and the situation of the water are checked and tested in person. The toilet thus selected has quality assurance.
1, whether the water tank leaks
Pumping toilet tank water leakage in addition to obvious drip sound can be determined, generally not easy to find.
Test method: Instill blue ink in the toilet water tank, stir to see whether there is blue water flowing out of the toilet water outlet, and if there is, it indicates that the toilet bowl has leaked water.
2, flush listening to sound, see the effect
The toilet should first have the basic functions of flushing thoroughly. The swash type and siphon-type sluice-type sewage discharge capability is strong, but the sound is large when flushing; the whirlpool type has a large amount of water consumption at a time, but has a good mute effect. It is recommended that the siphonic toilet be flushed, which can not only quickly flush dirt but also play a role in saving water.
Test method: Put a piece of white paper in the toilet bowl, drip in a few drops of blue ink, flush the water after the paper is dyed blue, and see if the toilet flushes thoroughly, and at the same time, hear whether the flushing effect is good or not.
<\p><\div>
Hot Selling Massage Gun,Pain Relief Fascia Gun,Body Massage Gun,Muscle Fascia Massage Gun
Shenzhen Hongyutai Technology Co., Ltd. , https://www.redyut.com