[ Chinese wardrobe net ] introduction of plastic door
The plastic door is also called a plastic molded door, and the door panel is made of plastic material, which has the characteristics of easy scrubbing, uniform surface gloss and comfortable viewing. The blister molded door is a combination of material and process. “Sucking†refers to the process of vacuum suction; “plastic†refers to the PVC film on the surface; “Mold†refers to the door panel before the PVC film is not pressed after milling; “Pressure†refers to the pressing of PVC film during forming. The process is referred to as a blister molded door. Most manufacturers on the market today call it a plastic door, and some manufacturers call it a molded door.
Advantages of blister closet doors
The closet plastic door panel is also known as the wardrobe molded door panel. It originated in Germany. Western families prefer this kind of door panel. The medium density board is used as the base material. After the engraving machine boring and milling pattern is formed, it is finely polished and then sprayed with special glue. After grinding, the surface covered PVC film is formed by vacuum blistering.
The PVC film of the wardrobe door panel is rich in color, the wood grain is realistic and has a three-dimensional effect, and the monochromatic color is pure and beautiful, generally no cracking, no deformation, scratch resistance, heat resistance, stain resistance, fade resistance and environmental protection performance. There are various patterns of plastic door panels in the wardrobe. After being molded by plastic molding, the door panels can be sealed into one body. There is no need for secondary sealing, which solves the problems of opening and damping after some plates are sealed. Defective plate".
The PVC film used for the wardrobe door panel is generally 0.15mm-0.45mm thick. The price imported from Germany is relatively expensive. South Korea, Japan and joint venture products are second, and the domestic price is lower. The good quality plastic door panel substrate is not easy to be deformed, and has good environmental protection performance, fine appearance, abrasion resistance, scratch resistance, high temperature resistance and flame retardant performance. The poor quality of the plastic door panel, the substrate is easy to deform, the appearance is rough, afraid of scraping.
The plastic door substrate is a MDF, the surface is vacuum-blended or a single seamless PVC film forming process is used. The plastic door panels are rich in color, realistic in wood grain, pure in color, free from cracking and deformation, scratch-resistant, heat-resistant, stain-resistant, fade-resistant and easy to maintain. It can be cleaned directly with a steel ball without damaging the surface and color.
Eye Makeup,Lipstick Makeup,Pink Lips,Shine Loud Liquid Lipstick
Guangzhou Boxuanya Cosmetics Co., Ltd. , https://www.bxycosmetic.com