[ Chinese wardrobe net ] Do the owners who bought the custom wardrobe at home have the problem of having a gap in the custom closet? What should I do if there is a gap in the custom closet? The following website will give you a share of the reasons and solutions for the custom wardrobe.
Reasons for the gap between the custom closet and the wall:
1. Customized wardrobe and wall with gaps are not properly measured
Customized wardrobes must be measured before the production of the owner's room to prevent some size of the furniture. Many owners have proposed to measure the door when they have not been renovated or have not finished renovation. At this time, the ground height and wall disposal have not been completed. It is easy to cause the furniture to be shipped to the home and found that it can not be installed. For example, if the cabinet is high, it will not be able to be transported upstairs after completing the stairs.
Since the two parties have a contract, if the furniture produced meets the size specifications of the contract and cannot be installed, it may be that the owner's home environment changes, such as the floor covering caused by the floor height, the two sides can solve the problem according to the contract. And because the data told by the owner is not necessarily accurate and standardized, the website reminds that when purchasing customized products, the designer must be on the spot to measure. Many furniture cannot be installed because the owners did not consider the switchgear, cable box, socket, electrical appliance. , the background wall, the heating cover and other factors caused by the replacement of the ceiling lamp into a chandelier may also have a practical impact on the furniture installation. The owner must inform these items in advance, so as not to cause regret. For this situation, some furniture manufacturers Provide a more detailed service. Before the installation of furniture, the workers will carry the corresponding tools. If there is a socket, the switch panel is blocked, etc., the hole will be drilled in the field to minimize the loss of the owner.
Some manufacturers need to explain the flatness and verticality of the ground and wall before the installation, and make appropriate adjustments according to the test results. The owner can also know the problem at the first time.
2, custom wardrobe and wall gap design is improper
Customized wardrobes are installed relative to waste furniture. The problem may be slightly more. Experts say that some owners will ask for "unreliable" requirements, such as punching holes in glass, etc., designers will also put forward their own reasonable It is recommended to prevent gaps, misalignments, etc. due to uneven design due to design defects.
The website suggests that even if you choose a custom closet, the owner should pay more attention to the designer's professional advice. If the furniture design is flawed, it will be reflected in the installation of the device. The person in charge of the furniture brands said that if the problem is found at the scene. Very large, generally return to the factory, re-install after the change; if the problem is not too big, the site can be resolved through other, generally can be dealt with after reaching an agreement with the customer.
3, the use of custom wardrobes and wall gaps is improper
According to the professional introduction, after the furniture is used for half a year, the furniture that has been qualified for the original equipment will also have a large gap, tilting left and right, etc., which are mostly related to the user's use. For example, the sliding door of the wardrobe is easy to slide to one side, mostly for the clothing in the wardrobe. Unbalanced, one side is light, one side is heavy; the gap between a certain drawer and its upper drawer becomes larger, which is also caused by too many heavy objects placed in the drawer; when the bookcase is placed on the book, because the book is heavy, the bookcase There may also be some deformation. However, these problems are not serious, and the customer service staff can adjust the position of the hardware to solve the problem.
Custom wardrobe has a gap solution:
1. Use the putty knife to scrape the gap between the wardrobe and the wall with a putty knife, and scrape it into a figure-eight shape with a narrow outer width.
2. Use gypsum block dry powder to add gaps. The filling depth is not less than 30-40mm. Do not fill the wall surface, which is 1-1.5mm lower than the wall surface.
3, brush 108 glue at the gap and stick glass cloth or kraft paper strip.
4, scrape 821 putty 2-3 times with the original wall to level the Sogou, dry and sandpaper flat.
5, configure the wall coating, after the paint configuration, first brush the sample, after drying and the color of the wall, the color is close, the color difference is not large, can be painted.
Mobile Patient Lift,Portable Patient Lift,Mover Mobile Patient Lift,Hospital Mobile Patient Lift
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmjiameimedical.com