National standards related to cemented carbide
GB/T 14445-1993 Cemented carbide products for coal mining tools
GB/T 2077-1987 Carbide indexable insert fillet radius
GB/T 2079-1987 Non-porous carbide indexable inserts
GB/T 2081-1987 Carbide indexable milling insert
GB/T 1481-1998 Determination of compressibility of metal powders (excluding hard alloy powders) in uniaxial compression
GB/T 5166-1998 Determination of elastic modulus of sintered metal materials and hard alloys
GB/T 9096-2002 Sintered metal materials (excluding hard alloys) impact test method
GB/T 9097.1-2002 Determination of apparent hardness of sintered metal materials (excluding hard alloys) Part 1
GB/T 5319-2002 Determination of transverse rupture strength of sintered metal materials (excluding hard alloys)
GB/T 6480-2002 Hard alloy bit for rock drilling
GB/T 17985.1-2000 Carbide turning tools - Part 1: Codes and signs
GB/T 17985.2-2000 Carbide turning tools - Part 2: External surface turning tools
GB/T 17985.3-2000 Carbide turning tools - Part 3: Internal surface turning tools
GB/T 18376.2-2001 Carbide grades Part 2: Carbide grades for geological and mining tools
GB/T 18376.3-2001 Carbide grades - Part 3: Carbide grades for wear-resistant parts
GB/T 3488-1983 Metallographic determination of cemented carbide microstructure
GB/T 3489-1983 Metallographic determination of cemented carbide porosity and non-combined carbon
GB/T 9217.2-2005 Carbide rotating crucibles Part 2: Cylindrical rotating crucibles (type A)
GB/T 9217.3-2005 Carbide rotary 锉 Part 3: Cylindrical ball head rotating 锉 (C type)
GB/T 9217.4-2005 Carbide rotating 锉 Part 4: spheroidal rotating 锉 (D type)
GB/T 9217.5-2005 Carbide rotary 锉 Part 5: Elliptical rotating 锉 (E type)
GB/T 9217.6-2005 Carbide rotating crucibles - Part 6: s.
GB/T 9217.7-2005 Carbide rotary boring - Part 7: s.
GB/T 9217.8-2005 Carbide rotary 锉 part 8: Torch-shaped rotating 锉 (H type)
GB/T 9217.9-2005 Carbide rotary 锉 Part 9: 60° and 90° conical rotating 锉 (J and K)
GB/T 9217.10-2005 Carbide rotating crucibles - Part 10: Conical round head rotating 锉 (L type)
GB/T 9217.11-2005 Carbide rotating crucibles - Part 11: Conical tip rotating 锉 (M type)
GB/T 9217.12-2005 Carbide rotary boring - Part 12: s.
GB/T 9217.1-2005 Carbide rotary boring - Part 1: General technical conditions
GB/T 3848-1983 Hard alloy coercivity (magnetic) force determination method
GB/T 3849-1983 Hard alloy Rockwell hardness (A scale) Test method
GB/T 3850-1983 Method for determination of density of dense sintered metal materials and hard alloys
GB/T 3851-1983 Determination method of transverse fracture strength of cemented carbide
Cemented carbides -- Determination of chromium content -- Flame atomic absorption spectrometric method
GB / T 20255.2-2006 - Determination of cobalt, iron, manganese and nickel - Determination of cobalt
Methods of chemical analysis of cemented carbides - Determination of molybdenum, titanium and vanadium - Atomic absorption spectroscopy
GB/T 20255.4-2006 Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium - Atomic mass spectrometric method
GB / T 20255.1-2006 - Determination of calcium, potassium, magnesium and sodium -
GB/T 5163-2006 Determination of density, oil content and opening ratio of osmotic sintered metal materials of sintered metal materials (excluding hard alloys)
GB/T 5242-2006 Inspection rules and test methods for cemented carbide products
GB/T 5243-2006 Marking, packaging, transportation and storage of hard alloy products
GB/T 9062-2006 Carbide misaligned three-face milling cutter
GB/T 10947-2006 Carbide taper shank twist drill
GB/T 10948-2006 Carbide T-slot milling cutter
GB/T 5124.3-1985 Determination of cobalt content by potentiometric titration
GB/T 5124.4-1985 Determination of titanium content by peroxide photometric method
GB/T 5159-1985 Metallic powders (excluding powders for hard alloys) Methods for the determination of dimensional changes associated with forming and sintering
GB/T 5167-1985 Determination of resistivity of sintered metal materials and hard alloys
GB/T 2078-2007 Carbide indexable inserts with rounded holes
GB/T 2080-2007 Carbide indexable insert size with rounded counterbore
GB/T 21182-2007 Carbide scrap
GB/T 5318-1985 sintered metal materials (excluding hard alloys)
GB/T 5124.1-2008 Methods for chemical analysis of cemented carbides - Determination of total carbon content
GB/T 5124.2-2008 Determination of insoluble (free) carbon
GB/T 16770.2-2008 Solid carbide straight shank end mills - Part 2: Technical conditions
GB/T 2527-2008 Hard alloy teeth for mining and oil field drill bits
GB/T 16456.2-2008 Carbide helical end mills Part 2: 7:24 Taper shank end mills and sizes
GB/T 16456.4-2008 Carbide helical end mills - Part 4: Technical conditions
GB/T 16456.9-2010 Carbide electronic cutting tool: cutting machine blade and V-CUT knife size model
Carbide helical end mills - Part 3: Morse taper shank type and size
GB/T 16456.1-2008 Helical end mills - Part 1
GB/T 16770.1-2008 Solid carbide straight shank end mills - Part 1: Types and dimensions
GB/T 3612-2008 Carbide blanks for gauges and gauges
GB/T 6110-2008 Carbide drawing model and size
GB/T 20255.6-2008 Methods for chemical analysis of hard alloys - General requirements for flame atomic absorption spectrometry
GB/T 11102-2008 Cemented carbide products for geological exploration tools
GB/T 18376.1-2008 Carbide grades Part 1: Carbide grades for cutting tools
GB/T 3879-2008 Steel Bonded Carbide Material Blank
GB/T 10417-2008 Tungsten carbide steel junction cemented carbide technical conditions and test methods
GB/T 14330-2008 Carbide machine clamp three-sided edge milling cutter
GB/T 14301-2008 Solid Carbide Saw Blade Milling Cutter
GB/T 4251-2008 reamer for cemented carbide machine
GB/T 6883-1995 Carbide blank for wire, rod and tube die
GB/T 6885-1986 Hard alloy mixed powder sampling and test methods
GB/T 11101-2009 Carbide round bar blank
GB/T 23369-2009 Standard test method for determination of magnetic saturation (MS) of hard alloys
GB/T 23370-2009 Hard alloy compression test method
GB/T 14388-2010 Woodworking Carbide Circular Saw Blade
GB/T 6335.1-2010 Rotating and rotating impact carbide drills - Part 1: Dimensions
GB/T 25667.1-2010 Solid carbide straight shank twist drills Part 1: Straight shank twist drills
GB/T 25667.2-2010 Solid carbide straight shank twist drills Part 2: 2° slanting straight shank twist drills
GB/T 25667.3-2010 Solid carbide straight shank twist drills Part 3: Technical conditions
GB/T 6335.2-2010 Rotating and rotating impact carbide drills - Part 2: Technical conditions
GB/T 25670-2010 Carbide helical end mill
GB/T 25666-2010 Carbide Straight Shank Twist Drill
GB/T 7963-1987 sintered metal materials (excluding hard alloys) tensile specimens
GB/T 7964-1987 sintered metal materials (excluding hard alloys) tensile test at room temperature
GB/T 7997-1987 Hard alloy Vickers hardness test method
GB/T 26052-2010 Carbide tubular electrode
GB/T 26053-2010 Carbide spray welding powder
GB/T 26054-2010 Carbide Recycled Mixture
GB/T 25992-2010 Solid carbide and ceramic straight shank ball end mill size
GB/T 26050-2010 Cemented carbide X-ray fluorescence determination of metal element content melting method
GB/T 26051-2010 Determination of sulfur and carbon in hard alloy cobalt powders
GB/T 26280-2010 Hard alloy monolithic brazing
GB/T 3849.2-2010 Hardmetals hardness test (A scale) Part 2: Preparation and calibration of standard test blocks
GB/T 28248-2012 Carbide drill bits for printed boards
GB/T 11108-1989 Method for determination of thermal diffusivity of cemented carbide
GB/T 1817-1995 Hard alloy normal temperature impact toughness test method [2]
GB/T 14445-1993 Cemented carbide products for coal mining tools
GB/T 2077-1987 Carbide indexable insert fillet radius
GB/T 2079-1987 Non-porous carbide indexable inserts
GB/T 2081-1987 Carbide indexable milling insert
GB/T 1481-1998 Determination of compressibility of metal powders (excluding hard alloy powders) in uniaxial compression
GB/T 5166-1998 Determination of elastic modulus of sintered metal materials and hard alloys
GB/T 9096-2002 Sintered metal materials (excluding hard alloys) impact test method
GB/T 9097.1-2002 Determination of apparent hardness of sintered metal materials (excluding hard alloys) Part 1
GB/T 5319-2002 Determination of transverse rupture strength of sintered metal materials (excluding hard alloys)
GB/T 6480-2002 Hard alloy bit for rock drilling
GB/T 17985.1-2000 Carbide turning tools - Part 1: Codes and signs
GB/T 17985.2-2000 Carbide turning tools - Part 2: External surface turning tools
GB/T 17985.3-2000 Carbide turning tools - Part 3: Internal surface turning tools
GB/T 18376.2-2001 Carbide grades Part 2: Carbide grades for geological and mining tools
GB/T 18376.3-2001 Carbide grades - Part 3: Carbide grades for wear-resistant parts
GB/T 3488-1983 Metallographic determination of cemented carbide microstructure
GB/T 3489-1983 Metallographic determination of cemented carbide porosity and non-combined carbon
GB/T 9217.2-2005 Carbide rotating crucibles Part 2: Cylindrical rotating crucibles (type A)
GB/T 9217.3-2005 Carbide rotary 锉 Part 3: Cylindrical ball head rotating 锉 (C type)
GB/T 9217.4-2005 Carbide rotating 锉 Part 4: spheroidal rotating 锉 (D type)
GB/T 9217.5-2005 Carbide rotary 锉 Part 5: Elliptical rotating 锉 (E type)
GB/T 9217.6-2005 Carbide rotating crucibles - Part 6: s.
GB/T 9217.7-2005 Carbide rotary boring - Part 7: s.
GB/T 9217.8-2005 Carbide rotary 锉 part 8: Torch-shaped rotating 锉 (H type)
GB/T 9217.9-2005 Carbide rotary 锉 Part 9: 60° and 90° conical rotating 锉 (J and K)
GB/T 9217.10-2005 Carbide rotating crucibles - Part 10: Conical round head rotating 锉 (L type)
GB/T 9217.11-2005 Carbide rotating crucibles - Part 11: Conical tip rotating 锉 (M type)
GB/T 9217.12-2005 Carbide rotary boring - Part 12: s.
GB/T 9217.1-2005 Carbide rotary boring - Part 1: General technical conditions
GB/T 3848-1983 Hard alloy coercivity (magnetic) force determination method
GB/T 3849-1983 Hard alloy Rockwell hardness (A scale) Test method
GB/T 3850-1983 Method for determination of density of dense sintered metal materials and hard alloys
GB/T 3851-1983 Determination method of transverse fracture strength of cemented carbide
Cemented carbides -- Determination of chromium content -- Flame atomic absorption spectrometric method
GB / T 20255.2-2006 - Determination of cobalt, iron, manganese and nickel - Determination of cobalt
Methods of chemical analysis of cemented carbides - Determination of molybdenum, titanium and vanadium - Atomic absorption spectroscopy
GB/T 20255.4-2006 Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium - Atomic mass spectrometric method
GB / T 20255.1-2006 - Determination of calcium, potassium, magnesium and sodium -
GB/T 5163-2006 Determination of density, oil content and opening ratio of osmotic sintered metal materials of sintered metal materials (excluding hard alloys)
GB/T 5242-2006 Inspection rules and test methods for cemented carbide products
GB/T 5243-2006 Marking, packaging, transportation and storage of hard alloy products
GB/T 9062-2006 Carbide misaligned three-face milling cutter
GB/T 10947-2006 Carbide taper shank twist drill
GB/T 10948-2006 Carbide T-slot milling cutter
GB/T 5124.3-1985 Determination of cobalt content by potentiometric titration
GB/T 5124.4-1985 Determination of titanium content by peroxide photometric method
GB/T 5159-1985 Metallic powders (excluding powders for hard alloys) Methods for the determination of dimensional changes associated with forming and sintering
GB/T 5167-1985 Determination of resistivity of sintered metal materials and hard alloys
GB/T 2078-2007 Carbide indexable inserts with rounded holes
GB/T 2080-2007 Carbide indexable insert size with rounded counterbore
GB/T 21182-2007 Carbide scrap
GB/T 5318-1985 sintered metal materials (excluding hard alloys)
GB/T 5124.1-2008 Methods for chemical analysis of cemented carbides - Determination of total carbon content
GB/T 5124.2-2008 Determination of insoluble (free) carbon
GB/T 16770.2-2008 Solid carbide straight shank end mills - Part 2: Technical conditions
GB/T 2527-2008 Hard alloy teeth for mining and oil field drill bits
GB/T 16456.2-2008 Carbide helical end mills Part 2: 7:24 Taper shank end mills and sizes
GB/T 16456.4-2008 Carbide helical end mills - Part 4: Technical conditions
GB/T 16456.9-2010 Carbide electronic cutting tool: cutting machine blade and V-CUT knife size model
Carbide helical end mills - Part 3: Morse taper shank type and size
GB/T 16456.1-2008 Helical end mills - Part 1
GB/T 16770.1-2008 Solid carbide straight shank end mills - Part 1: Types and dimensions
GB/T 3612-2008 Carbide blanks for gauges and gauges
GB/T 6110-2008 Carbide drawing model and size
GB/T 20255.6-2008 Methods for chemical analysis of hard alloys - General requirements for flame atomic absorption spectrometry
GB/T 11102-2008 Cemented carbide products for geological exploration tools
GB/T 18376.1-2008 Carbide grades Part 1: Carbide grades for cutting tools
GB/T 3879-2008 Steel Bonded Carbide Material Blank
GB/T 10417-2008 Tungsten carbide steel junction cemented carbide technical conditions and test methods
GB/T 14330-2008 Carbide machine clamp three-sided edge milling cutter
GB/T 14301-2008 Solid Carbide Saw Blade Milling Cutter
GB/T 4251-2008 reamer for cemented carbide machine
GB/T 6883-1995 Carbide blank for wire, rod and tube die
GB/T 6885-1986 Hard alloy mixed powder sampling and test methods
GB/T 11101-2009 Carbide round bar blank
GB/T 23369-2009 Standard test method for determination of magnetic saturation (MS) of hard alloys
GB/T 23370-2009 Hard alloy compression test method
GB/T 14388-2010 Woodworking Carbide Circular Saw Blade
GB/T 6335.1-2010 Rotating and rotating impact carbide drills - Part 1: Dimensions
GB/T 25667.1-2010 Solid carbide straight shank twist drills Part 1: Straight shank twist drills
GB/T 25667.2-2010 Solid carbide straight shank twist drills Part 2: 2° slanting straight shank twist drills
GB/T 25667.3-2010 Solid carbide straight shank twist drills Part 3: Technical conditions
GB/T 6335.2-2010 Rotating and rotating impact carbide drills - Part 2: Technical conditions
GB/T 25670-2010 Carbide helical end mill
GB/T 25666-2010 Carbide Straight Shank Twist Drill
GB/T 7963-1987 sintered metal materials (excluding hard alloys) tensile specimens
GB/T 7964-1987 sintered metal materials (excluding hard alloys) tensile test at room temperature
GB/T 7997-1987 Hard alloy Vickers hardness test method
GB/T 26052-2010 Carbide tubular electrode
GB/T 26053-2010 Carbide spray welding powder
GB/T 26054-2010 Carbide Recycled Mixture
GB/T 25992-2010 Solid carbide and ceramic straight shank ball end mill size
GB/T 26050-2010 Cemented carbide X-ray fluorescence determination of metal element content melting method
GB/T 26051-2010 Determination of sulfur and carbon in hard alloy cobalt powders
GB/T 26280-2010 Hard alloy monolithic brazing
GB/T 3849.2-2010 Hardmetals hardness test (A scale) Part 2: Preparation and calibration of standard test blocks
GB/T 28248-2012 Carbide drill bits for printed boards
GB/T 11108-1989 Method for determination of thermal diffusivity of cemented carbide
GB/T 1817-1995 Hard alloy normal temperature impact toughness test method [2]
Double Dog Stroller,Classic Pet Stroller,Pet Gear Dog Stroller,Classic Pet Stroller Ps168
DongGuan Baby-Plus baby ware Co., Ltd. , https://www.baby-plus.com